Igris (Solo Leveling) 1/10 Scale Statue | Pre‑Supported STL | Diorama Base

Fan art of Igris from Solo Leveling, built for resin printing. The model is split for printing and assembly, includes pre‑supported STL files (no LYS), and features an extra‑large base designed to pair as a diorama with Sung Jin Woo. Test printing has been completed successfully.

Digital STL product only; no physical item is shipped.

What’s included (each scale/version on its own bullet)

• 1/10 scale Igris full statue — split parts — pre‑supported STL files
• Extra‑large display base — STL files (designed to form a diorama with Sung Jin Woo; figure not included)

Compatibility and files (SLA/DLP resin; STL; LYS if pre‑supported is included)

• Printer type: SLA/DLP/MSLA resin printers
• File format: STL
• Pre‑supports: Included as pre‑supported STLs; no LYS scene files
• Notes: Large base may exceed smaller build volumes; print in sections or scale as needed

General resin printing guidance (layer height, hollowing, supports, curing)

• Layer height: 0.03–0.05 mm for figure detail
• Orientation/supports: Maintain strong anchors on heavy armor and cape sections; 30–45° tilt typical
• Hollowing: If you choose to hollow, keep ~2.5–3.0 mm walls with adequate drain/vent holes
• Wash & cure: Clean thoroughly (IPA/resin‑safe), air‑dry, then UV cure; avoid overcuring to reduce brittleness
• Assembly: Dry‑fit, sand contact points, then prime before painting

Digital delivery (PDF with private cloud link; keep PDF for updates)
A PDF with a private Google Drive link is provided after purchase. Keep the PDF for future updates.

License and disclaimer (Personal use only; fan art; not affiliated or endorsed)
Personal use only. Fan art inspired by Solo Leveling (Igris concept). Not affiliated with or endorsed by the official rights holders.

Quick FAQ (4–5 Q/A):

• Q: Are LYS files included?
  A: No. Pre‑supported STL files are included; no LYS scenes.
• Q: Is Sung Jin Woo included?
  A: No. The base is designed to pair as a diorama with Sung Jin Woo, but only Igris and the base STLs are included.
• Q: Can I print this on FDM?
  A: It’s intended for resin printers; FDM may lose fine details.
• Q: Can I scale the model?
  A: Yes, but check support strength and wall thickness if scaling significantly.
• Q: Was this test‑printed?
  A: Yes. Test printing has been completed and confirmed.